Kaji performa mesin refrigerasi siklus kompresi uap dengan refrigeran R134a dan refrigeran hidrokarbon sebagai drop-in substitute pada dengan alat ekspansi berbeda

Authors

  • Azridjal Aziz Jurusan Teknik Mesin Universitas Riau Author
  • Iqbal Parija Jurusan Teknik Mesin Universitas Riau Author
  • Rahmat Iman Mainil Jurusan Teknik Mesin Universitas Riau Author

DOI:

https://doi.org/10.71452/d8day211

Keywords:

R-134a, MC-134, capillary tube, thermostatic expansion device, COP

Abstract

Refrigerant is an essential working fluid in refrigeration system. However, the use of synthetic refrigerant such as R-134a is now restricted due to its high Global Warming Potential (GWP) value. As an alternative, MC-134 as hydrocarbon refrigerant offers more environmentally friendly solution. This research aims to compare the performance of R-134a and MC-134 in a vapor compression refrigeration cycle system, as well as analyze the influence of expansion devices, namely capillary pipes and Thermostatic Expansion Valves (TEV). The test results show that for R-134a, increasing the length of the capillary pipe, increases the Coefficient of Performance (COP) by 20.83% due to decrease in compression work. In contrast, for MC-134, there is  decrease in COP by 3.35%. TEV provides the best performance with an increase in refrigeration effect of 6.05% and COP of 25.07%. However, TEV is not suitable for MC-134 because the low condensing pressure inhibits the phase change to liquid. In the use of 1.25 m and 1.5 m capillary pipes, MC-134 even has a higher COP of up to 16.65% compared to R-134a. Despite this, MC-134 still shows potential as a replacement for R-134a, with 30% of the mass capable of producing twice the refrigeration effect and 7.52% lower electric current consumption.

References

IIR, “The Role of Refrigeration in the Global Economy.” International Institute of Refrigeration (IIR), 2019. doi: 10.18462/IIF.NITEC38.06.2019.

UNEP, “Refrigeration, Air Conditioning and Heat Pumps Technical Options Committee. 2022 Assessment Report.” United Nations Environment Programme, 2022. [Daring]. Tersedia pada: https://ozone.unep.org/system/files/documents/RTOC-assessment%20-report-2022.pdf

A. Aziz, “Komparasi Katup Ekspansi Termostatik dan Pipa Kapiler terhadap Temperatur dan Tekanan Mesin Pendingin,” Pros. SNTK TOPI, 2013.

A. Aziz dan B. H. Hartanto, “Pengaruh Penggunaan Katup Ekspansi Termostatik dan Pipa Kapiler terhadap Efisiensi Mesin Pendingin Siklus Kompresi Uap,” Proceeding Semin. Nas. Tah. Tek. Mesin XIII SNTTM XIII, 2014.

A. H. Dhumal dan H. M. Dange, “Investigation of Influence of the Various Expansion Devices on The Performance of A Refrigerator Using R407C Refrigerant,” Int. J. Adv. Eng. Technol., vol. V, no. II, hlm. 96–99, 2014, doi: 10.13140/RG.2.2.11013.96483.

R. Joshi, V. Patil, D. A. Patil, dan T. Koli, “Experimental Analysis of Thermostatic Expansion Valve, Constant Expansion Device & Cap Tube on Vapour Compression Refrigeration System,” Int. J. Sci. Eng. Appl. Sci. IJSEAS, vol. 2, no. 6, 2016.

UNEP, “Kigali Amendment to the Montreal Protocol on Substances that Deplete the Ozone Layer.” United Nations Environment Programme, 2016.

Peraturan Presiden, “Peraturan Presiden Republik Indonesia Nomor 129 Tahun 2022.” 2022.

R. I. Mainil, N. Deswita, A. K. Mainil, dan A. Aziz, “Kondisi Kerja Mesin Refrigerasi Kompresi Uap Pada Variasi Massa Refrigeran Hidrokarbon,” J. Sains Dan Teknol. 19 2 Sept. 2020, hlm. 63–68, 2020.

R. Muliawan, A. A. A, T. Sutandi, dan N. Nurrohman, “Cooling System Performance Comparison of Refrigerant R-134a and MC-134 on Ice Slush Machine,” FLYWHEEL J. Tek. Mesin Untirta, hlm. 1, Mei 2021, doi: 10.36055/fwl.v0i0.9237.

H. Zheng, G. Tian, Y. Zhao, C. Jin, F. Ju, dan C. Wang, “Experimental Study of R290 Replacement R134a in Cold Storage Air Conditioning System,” Case Stud. Therm. Eng., vol. 36, hlm. 102203, Agu 2022, doi: 10.1016/j.csite.2022.102203.

A. Aziz, Izzudin, dan A. K. Mainil, “Performance Comparison of a Refrigerator System Using R134a and Hydrocarbon Refrigerant (HCR134a) with Different Expansion Devices,” IOP Conf. Ser. Mater. Sci. Eng., vol. 237, hlm. 012008, Sep 2017, doi: 10.1088/1757-899X/237/1/012008.

R. S. Subagyo, F. Oktapiyanor, Fadliyanur, Muchsin, dan H. Y. Nanlohy, “Analisis Kinerja AC Mobil dengan Variasi Freon R-134a, HFC-134, dan MC-134,” Sci. J. Mech. Eng. Kinemat., vol. 6, no. 2, hlm. 119–128, Des 2021, doi: 10.20527/sjmekinematika.v6i2.193.

I. D. M. Susila, D. S. Anakottapary, I. W. A. Subagia, P. W. Sunu, dan I. N. Ardita, “Penggunaan Refrigeran Hidrokarbon MC-134 Pada Mesin Freezer untuk Pedagang Es Krim Keliling,” J. Appl. Mech. Eng. Green Technol., vol. 3, hlm. 48–52, 2022.

S. K. Wang, Handbook of Air Conditioning and Refrigeration, 2nd ed. New York, N.Y: McGraw-Hill Education LLC, 2001.

I. B. G. Widiantara, I. G. A. Negara, dan A. I Made Anom, Ed., “Improved Efficiency and Temperature Control in Single Evaporator Domestic Refrigerators: A Study of the Impact of Thermostatic Expansion Valves,” dalam Proceedings of the International Conference on Sustainable Green Tourism Applied Science - Engineering Applied Science 2024 (ICoSTAS-EAS 2024), vol. 249, dalam Advances in Engineering Research, vol. 249. , Dordrecht: Atlantis Press International BV, 2024, hlm. 120–125. doi: 10.2991/978-94-6463-587-4_14.

S. R. Yennawar, P. P. Borkar, A. S. Harkare, dan V. A. Bhandari, “Performance Analysis And Comparison Of Vapour Compression Refrigeration System Using R-134a And R-600a Refrigerants,” Vol. E, 2015.

M. Mohanraj, S. Jayaraj, C. Muraleedharan, dan P. Chandrasekar, “Experimental investigation of R290/R600a mixture as an alternative to R134a in a domestic refrigerator,” Int. J. Therm. Sci., vol. 48, no. 5, hlm. 1036–1042, Mei 2009, doi: 10.1016/j.ijthermalsci.2008.08.001.

Downloads

Published

09-03-2026

Conference Proceedings Volume

Section

Energy

How to Cite

[1]
A. Aziz, I. Parija, and R. I. Mainil , Trans., “Kaji performa mesin refrigerasi siklus kompresi uap dengan refrigeran R134a dan refrigeran hidrokarbon sebagai drop-in substitute pada dengan alat ekspansi berbeda”, Seminar Nasional Tahunan - Teknik Mesin , vol. 23, no. 1, pp. 178–183, Mar. 2026, doi: 10.71452/d8day211.